After the technician adjusts the machine to OK according to SOP, inform the operator to fix the raw material of the belt on the discharge tray, turn on the switches of heating die and preheating die, press the automatic start button on the touch screen after heating to the set temperature, and the machine will enter the full-automatic mode and start working;

The carrier tape first clamps the belt by the clamping cylinder, pulls the set length forward, then releases it, returns to the initial position, and then clamps the belt. At the same time, the clamping cylinder clamps the belt so that it is not tight or slow.

While the belt stops moving forward, the push rod and the belt pressing orange act at the same time. At this time, fix the tape from the side and up and down positions. At this time, the heating die acts to close the mold, Simply make the temperature of the thermoplastic plastic tape carrying sheet quickly to the set position. After the action of the heating die, the forming die is also closed.

At the same time, there is a little wind and the blow valve is opened. Because the gas is too strong, the heated plastic sheet is formed according to the shape of the forming die. If the tape carrying material is difficult to form, these actions that can open the secondary forming are also possible, Make the sheet pressed by the secondary forming die again, the effect will be better, and the belt forming speed will be faster After the action of the forming die, the needle die is started and a hole is punched on the tape carrying sheet every 3mm. This is a standard regulation, and the strap starts again

 The tape feeding and take-up are driven by an ordinary motor. A circular belt is installed on the belt feeding and take-up to buffer the belt transmission, and the photoelectric sensor is used to detect the belt to realize automatic material collection and release. This practice is scientific and effective

Junan’s main products include IC carrier tape, SMD carrier tape, SMT carrier tape, LED carrier tape, hardware carrier tape, etc. products with special specifications can also be designed and manufactured according to customers’ needs

In the production process of Junan carrier tape, the setting of heating temperature and time, forming, blowing and secondary forming process time are the key to determine the quality of parison