Nevertheless, some customers often react with our company during the packaging process that the sealing adhesion of the carrier belt is too strong,

Carrier tape packaging is a technology, which needs to adjust the parameters according to the matching packaging of carrier tape and upper tape. Then, according to the cause analysis, our engineering suggestions can be adjusted from the following points:

First, lower the temperature;

Second: reduce the pressure;

Third: if the temperature and pressure are lowered and this problem still occurs, it indicates that it is the problem of the upper cover tape.

In addition, to solve this problem, the customer can also try the following methods: adjust the temperature to 180-190. If the sealing viscosity of the belt on the carrier belt is too strong, it means that the temperature is high, then adjust the temperature to 150-160. If there are similar problems, it means that the cover tape is thin and needs to be thickened.

In general, there are wire drawing, broken belt and other situations, that is, it is related to keeping up with the thin belt. In short, it is necessary to analyze the specific situation.