PC sheet processing mainly involves hot forming, stamping, bonding, polishing and other specific processes. Due to the particularity of materials

The following points should be paid attention to in the production and processing of PC sheet in order to achieve the ideal quality.

Hot forming of PC sheet refers to putting the sheet into a high-temperature machine for a period of time to soften it

Then put the PC board into the pre prepared mold for cooling and forming

However, it should be noted that if the sheet is placed for a long time, it needs to be dried and dehumidified before thermoforming

In the softening process of hot forming, the time and temperature should be controlled to avoid internal defects.

There are many holes in the product that need to be processed by PC sheet, and stamping can not only reduce the cost, but also improve the efficiency

However, it should be noted that stamping is for some thin products,

The sheet itself should have a certain toughness, and the materials that are easy to fracture cannot be stamped

Each plastic board is adhered with a special glue, which is determined by the physical properties of the board,

The bonding quality of PC sheet depends on the bonding strength, bonding flatness and appearance effect.

PC sheet polishing is mainly a post-processing technology for the cutting or engraving parts of the sheet.

There are many kinds of polishing of PC board, such as wool pad polishing, polishing knife and art knife polishing. Different methods can be selected according to needs.