The forming steps of SMD carrier tape are as follows:

1.Heat the plastic belt, which can also be called leather.

2.Pull the strap a fixed distance to the position of the forming die.

3.The forming die rises to the position of the plastic belt.

4.Blow air to make the heating part of the plastic belt close to the molding mold cavity for molding.

5.Punching die punching.

6.The receiving tray receives materials.

—SMD carrier tape formed

SMD carrier belt is a kind of electronic packaging material formed by plastic belt. Its forming principle is to heat the leather to a certain temperature through the heating part of the carrier belt forming machine, blow air through the forming die, then punch out the side hole through the punching die, and then pull forward by the pulling part. When the set modulus is reached, the cutter cylinder acts to complete the production of one roll, Then it is completed by the receiving reel.—SMD carrier tape formed

SMD carrier tape is mainly used in the electronic component mounting industry. It is used with tape or cover tape to carry and store a series of small electronic components such as resistors, capacitors, transistors and diodes in the pocket of thin carrier tape, and form a closed package through the matching tape or cover tape of SMD carrier tape. It is often used to protect electronic components from any pollution and damage during transportation.—SMD carrier tape formed

SMD carrier tape is a strip product used in the field of electronics and packaging. It has a specific thickness, and holes (also known as pockets) for holding electronic components and positioning holes for index positioning are equally distributed in its length direction. SMD has fast belt loading speed. Generally, those with shallow bag mouth can run to the production speed of 450-520m / h on the general tablet machine. The depth increases slowly, so the SMD belt production speed is fast, it is easy to arrange production and compress the delivery time.