(1) Check the machine parts regularly and once a month to check whether the movable parts such as the bolts and bearings on the worm gear, worm and lubrication block rotate flexibly and wear. If any defects are found, they shall be repaired in time and shall not be used reluctantly.—carrier tape packaging machine

(2) The machine shall be used in a dry and clean room, and shall not be used in places where the atmosphere contains acids and other corrosive gases.

(3) After the machine is used or stopped, take out the rotating drum for cleaning and brushing the remaining powder in the bucket, and then install it properly to prepare for the next use.—-carrier tape packaging machine

(4) When the drum moves back and forth during operation, please adjust the M10 screw on the front bearing pawl to the appropriate position.

(5) If the machine is out of service for a long time, the whole body of the machine must be wiped and cleaned, the smooth surface of the machine must be coated with antirust oil and covered with a cloth.—carrier tape packaging machine