- 14
- Dec
When ask quotation, what about including of the embossed carrier tape?
Based on the tape cavity depth T2 (Figures 1 & 2) or the cavity pitch P1 (Figures 1 & 2), the
following must be considered as part of the procurement documents and quotation requests as
applicable:
(a) If T2 (Figure 1 & Table 1) exceeds 6.5 mm for 16 mm or 24 mm wide tape, the tape may
not feed through all tape feeders
(b) If T2 (Figure 2 & Table 1) exceeds 10.1 mm for 32 mm, 44 mm or 56 mm wide tape, the
tape may not feed through all tape feeders
(c) If the cavity pitch P1 (Figure 1 and Table 1) is less than 12 mm for 24 mm wide tape, the
tape may not index properly in all tape feeders
(d) If the cavity pitch P1 (Figure 2 and Table 1) is less than 16 mm for 32 mm wide tape, or
less than 24 mm for 44 mm wide tape, or less than 40 mm for 56 mm wide tape, the tape
may not index properly in all tape feeders